easiMARK Evoflex Blockout White (9001) 500mm

In stock
SKU
EM9001500
£8.70
  • Buy 25 for £8.39 each and save 4%
Victory Design Payment Options
Rating:
100% of 100
Victory Design - Branch Location

Central UK Location

Daily deliveries throughout
the UK and Europe

easiMARK Evoflex Blockout White is a heat seal garment film specifically designed for low temperature transfers on polyester sublimated garments. It prevents ink migration, so no colour from the garment bleeds through the film.

After pressing your transfer, you can peel the backing off either warm or cold and the low pressing time and temperature will help reduce your production times.

easiMARK Evoflex Blockout White garment film is suitable for polyester fabrics without treatments and dyed with sublimation inks.

Supplied by the metre at 500mm wide.

How to use:

  1. Cut in mirror image and weed away the excess garment film. Blade: new at 45 degrees, pressure: 60gf, speed: 30 cm/sec.
  2. Heat apply sealable side down at 130 degrees C for 15 seconds, medium pressure.
  3. Remove backing film when warm or cold.

Care instructions:

  • Wash up to 40 degrees C
  • Do not dry clean
  • Do not tumble dry
  • Iron on reverse

Please wait 24 hours after pressing before washing and do not use bleach or other aggressive chemical agents.

Product Download Icon

Product Specificiation

Download a full product specification here


Write Your Own Review
easiMARK Evoflex Blockout White (9001) 500mm
Your Rating